Project Spotlight • Fort Denaud / LaBelle, Florida

Super Screen Lanai Rescreen in Fort Denaud, Near LaBelle, FL

The screens on this covered lanai had seen better days. The mesh was loose, aged and dirty, some of the spline was coming out, and the enclosure screws were badly rusted. Come along with Solid Makers Aluminum Structures as the crew removes the old screening, installs heavier-duty Super Screen and pet-resistant lower panels, and gives this Fort Denaud lanai a much cleaner finish.

Lanai rescreening • Super Screen • Pet-resistant lower panels • Flat spline • Rusted screw replacement

The Project: Replacing Old, Loose Lanai Screens

When we arrived at this Fort Denaud property near LaBelle, the existing lanai screens were worn and loose. The screen material showed its age, and some of the panels were no longer held securely in their grooves. The job called for a complete screen replacement, not a new aluminum enclosure.

We removed the old screening, checked the existing framing and spline channels, cleaned the areas where the new mesh would be seated, and prepared the enclosure for a more durable screening upgrade.

Existing screened lanai exterior in Fort Denaud near LaBelle Florida
Existing screened lanai at the Fort Denaud home.

Upgrading the Lanai With Super Screen

For the main screen areas, we installed Super Screen, a heavier-duty screen material selected for its durability. In the video, we compare the older mesh side by side with the new material, showing the difference in appearance and feel. The new screen has a darker, more substantial look and takes extra care to handle, tension and trim.

We also compare 17/20 and 20/20 Super Screen mesh in the footage. The 20/20 weave is tighter, while the 17/20 mesh has a more open weave. The best choice depends on the homeowner's priorities, including insects, airflow and visibility.

Contractor's field note: Thicker mesh is not necessarily a quick install. Larger panels require careful tensioning, the right spline, and a sharp blade when trimming. The crew demonstrates those details in the project video.
Solid Makers crew installing thick pet-resistant screen in Fort Denaud lanai
Installing heavy pet-resistant screen in the lower panels.

Pet-Resistant Screen Along the Bottom

For the lower section of the enclosure, we installed pet-resistant screen. This heavier material is useful where pets may push against or scratch the lower panels. It's thicker and less forgiving to stretch, so the installer works the material into the channel carefully before securing it with spline.

For homeowners searching for pet screen installation in LaBelle or Port LaBelle, this job shows how a lower-panel upgrade can be combined with a full lanai rescreen rather than replacing every panel with the same mesh.

Why the Correct Flat Spline Matters

One of the most important details on this project was the spline. Some of the existing panels had been installed using round spline in a channel designed for flat spline. The result was screen that could work loose and pop out.

On this enclosure, we used .315 flat spline to secure the replacement screen in the compatible channels. Spline size and shape must match the actual extrusion and screen material; the correct fit should be checked on each job rather than assumed.

What homeowners should know: If your lanai screen keeps popping out, the problem may not be the mesh alone. Ask the contractor to inspect the spline and aluminum channel before simply replacing the panel.
Contractor showing round and flat screen spline during Fort Denaud lanai rescreen
A close-up demonstration of round and flat spline used in screen enclosures.

Replacing Rusted Screws for a Cleaner Finish

The old enclosure screws were visibly rusted. While the screens were being replaced, we removed the corroded screws and installed new fasteners with finishing caps. That extra step improved the appearance of the existing aluminum structure instead of leaving rusty screw heads beside fresh new screen.

If you're considering lanai rescreening, patio screen replacement or screen enclosure repair in LaBelle, ask whether your estimate includes inspection of aging screws and other hardware. Not every rescreen requires the same repairs, but it's worth checking while the crew is on site.

The Finished Fort Denaud Lanai

By the end of the job, the old loose mesh had been replaced with new Super Screen, the lower sections had pet-resistant screening, and the rusted screws had been changed out. The homeowner now has a refreshed screened outdoor area with a cleaner look and more durable screen materials.

Completed Super Screen lanai rescreen at a home in Fort Denaud near LaBelle Florida
Finished Super Screen lanai rescreen in Fort Denaud near LaBelle, Florida.

Is Super Screen Worth the Upgrade?

In the video, Danny explains why he personally favors Super Screen for homeowners who want durability and fewer repeat screen repairs. It costs more upfront than standard fiberglass screen, but the heavier material may make sense for a lanai that gets a lot of use. Actual service life depends on exposure, installation, maintenance and other conditions; no fixed lifespan is guaranteed.

We can help compare standard screen, tighter-weave insect screen, Super Screen and pet-resistant lower panels based on your patio and budget.

Lanai Rescreening in LaBelle, Port LaBelle and Nearby Communities

This project was completed in Fort Denaud, near LaBelle. Solid Makers Aluminum Structures also serves homeowners in LaBelle, Port LaBelle, Banyan Village and surrounding Hendry County communities. Whether you need a complete screened lanai rescreen, replacement of loose patio screens, pet-resistant lower panels, or a contractor to inspect failing spline, we can evaluate your existing enclosure and explain the options.

Looking to screen in an open patio rather than replace existing mesh? Visit our screen lanai installation page for LaBelle and Port LaBelle. For existing enclosure repairs, see our LaBelle screen enclosure repair service.

Frequently Asked Questions

How much does it cost to rescreen a lanai in LaBelle, FL?

Pricing depends on the number and size of panels, screen type, access, condition of the spline channels and whether hardware needs replacement. Text us photos and approximate dimensions for an estimate.

Can you replace old lanai screen with Super Screen?

Yes. We can evaluate your existing aluminum enclosure and discuss whether Super Screen is appropriate for the frame and panel sizes. This Fort Denaud project is an example of replacing older screen with Super Screen.

Can you install pet-resistant screen on the bottom of my lanai?

Yes. Pet-resistant screening can be installed in selected lower panels where the existing frame and channels are suitable. It is heavier than ordinary screen and needs careful installation.

Why does my lanai screen keep coming out of the frame?

Loose screen can have several causes, including worn spline, incorrect spline shape or size, and damaged or unsuitable screen channels. On this job, round spline had been used in channels requiring flat spline.

Do you replace rusted screws during a lanai rescreen?

We can inspect corroded enclosure fasteners and discuss replacement as part of the scope. On this project, we replaced rusted screws and installed finishing caps.

Do you rescreen lanais in Port LaBelle and Fort Denaud?

Yes. Solid Makers serves Fort Denaud, LaBelle, Port LaBelle and nearby Hendry County communities for lanai rescreening and aluminum screen enclosure work.

Need Your Lanai Rescreened in LaBelle or Port LaBelle?

Have loose, damaged or aging patio screens? Text Solid Makers a few pictures of the enclosure, your address and approximate dimensions. We'll help you figure out whether you need individual screen repairs, a full lanai rescreen, or upgraded mesh such as Super Screen and pet-resistant lower panels.

Call or Text 239-370-8055